Microcomputer electronic work 　　　　

    [Japanese][English]

    　I will introduce my work using the PIC microcomputer.

    If you want to contact me, go for it.

    No.TitlePhotoMain PartsSummary
    15
    Sample project about multiple HID devices
    (2013.11.22)
    (2014.01.13)
    [Jp]
    		 -SBDBT32 micom-board (PIC32MX is mounted)
    -usb hub with 4 ports
    -usb mouse
    -usb keyboard
    -usb joystick    		 This sample project introduce that multiple HID devices are connected to the PIC through the hub.
    Connect together the HID devices such as a joystick or a mouse or a keyboard to PIC using the HID device driver and USB host driver with a built-in USB HUB driver.
    　2014.1.13: Support multiple HUBs.
    14
    Make a MZ-80 emulator using a PIC32MX
    (2013.11.3)
    [Jp]
    		 -SBDBT32 micom-board (PIC32MX is mounted)
    -micro SD Card
    -usb keyboard
    -small speaker    		 I have made the emulator of MZ-80 using SBDBT32 microcontroller board.
    Can make it easily using the little resisters.
    13
    Radio program automatic recorder
    (2013.8.23)
    [Jp]
    		 -PIC32MX695F512H
    -OP amp (NJM2732,LM358)
    -32GB SDHC Card
    -FM/AM tunner unit    		 I made a recorder to save to the SD card automatically as a wave file the radio program according to the schedule.
    12
    Simple drive recorder
    (2013.7.16)
    [Jp]
    		 -REPIC32SD micom-board (PIC32MX is mounted)
    -EPSON LCD controller board
    -TOPWAY 3.5" TFT graphic LCD module
    -Logicool C525 Web camera    		 I made a simple drive recorder. It records the videos from the Web camera to the SD card. And, it will display the video image on the LCD screen at the same time.
    Further, it is possible to use as a video recorder in the room.
    Function of the "Photo Frame" comes with as a function of the discount.
    11
    Rotation display stand
    (2013.6.23)
    [Jp]
    		 -PIC24FJ64GB002
    -TA7291P　motor driver
    -TAMIYA 4speeds crank gear box
    -Servo motor
    -USB wireless mouse    		 I made last summer the rotation display stand which will be controlled by a wireless mouse.
    I introduce as a hint of summer homework this year.
    10
    Sample project about USB HUB
    (2013.5.12)
    [Jp]
    		 -SBDBT32 micom-board (PIC32MX is mounted)
    -usb hub with 4 ports
    -usb mouse
    -usb web camera
    -usb memory disk    		 This sample project introduce that multiple usb devices are connected to the PIC through the hub.
    In sample, Connect together a mouse, a camera and a memory disk to the PIC using USB host driver which has HUB driver.
    9
    Host driver with a built-in hub driver
    (2013.5.10)
    (2014.1.13)
    [Jp]
    		 -PIC24F/PIC32MX
    -usb_host.c
    -usb_host.h
    -usb_host_local.h    		 I made a USB host driver with a built-in USB hub driver.

    Introduction to the program only
    2014.1.13: Updated to support multiple HUBs.
    8
    Temperature Logger
    (2013.3.7)
    [Jp]
    		 -dsPIC30F3012
    LM61BZ temperature sensor
    -EN25T80 SPI flash ROM
    -RTC8564 real time clock module    		 I made the temperature logger using temperature sensor, SPI flash rom and real time clock module.
    7
    Alarm clock
    (2013.2.24)
    [Jp]
    		 -dsPIC30F3012
    -low voltage LCD with i2c interface
    -RTC8564 real time clock module    		 I made the alarm clock using LCD and real time clock module.
    6
    UVC camera driver
    (2013.1.19)
    [Jp]
    		 -PIC24FJ64GB002
    -PIC24FJ256GB106
    -PIC32MX695F512H
    -ELECOM/BUFFALO/LOGICOOL Web Camera
    -EPSON LCD controller board
    -TOPWAY 3.5" TFT graphic LCD module
    		 I made the UVC Class driver for the PIC24FJ and PIC32MX. I did test it using the some of web camera.
    5
    Network camera
    (2012.8.29)
    [Jp]
    		 -dsPIC30F2012
    -Camera module with FIFO memory
    -Servo motor
    -W5200 TCP/IP LAN module    		 I made the network camera. It is possible to remote control of pan and tilt.
    4
    Time Lapse camera
    (2012.8.24)
    [Jp]
    		 -PIC24FJ64GB002
    -SD card
    -USB A,B receptacle    		 I made a time-lapse camera using a FinePix digital camera that can be USB connection.
    It is saved on the SD card to get images from the camera.
    3
    IP-Phone
    (2012.6.12)
    [Jp]
    		 -PIC24FJ64GA002
    -low voltage LCD with i2c interface
    -W5100 TCP/IP LAN module
    -small earphone and mic    		 I made a simple IP-Phone. It works using SIP Protocol.
    2
    Oscillator and frequency counter
    (2011.3.28)
    [Jp]
    		 -dsPIC30F2012 micom board
    -DMD-F101 DENON MD recorder    		 I made a oscillator and frequency counter by using the microcomputer board and the MD recorder of junk.
    Microcomputer board is what came with the magazine.
    1
    Infrared remote controller
    (2008.8.19)
    [Jp]
    		 -78F0730 usb micom board
    -infrared LED
    -infrared receiver module    		 I made the infrared remote controller by using a usb microcomputer board that came with the magazine. magazine is the 'Toragi 2008.8'.